RB1100AHx4, CPU 4 Núcleos, 13 Puertos Gigabit Ethernet, 1 GB Memoria, Licencia Nivel 6
Codigo de Facturación: 43222609
Envíos gratis en:
Mexicaltzingo | Ocoyoacac | Calimaya | Almoloya de Juárez | Tianguistenco | Xonacatlán | Toluca | Tenango del Valle | San Mateo Atenco | Zinacantepec | Metepec | Lerma
El pedido mínimo puede variar dependiendo la distancia.
Descripción
RB1100AHx4
Nuevo RB1100AHx4 tiene CPU Annapurna Alpine AL21400 con cuatro núcleos de Cortex A15 frecuencia de reloj de 1,4 GHz cada uno, para un caudal máximo de hasta 7.5Gbps. El dispositivo es compatible con la aceleración de hardware IPsec y es más rápido en esto que cualquier dispositivo RouterBOARD anterior (hasta 2.2Gbps con AES128). La unidad viene con la caja de montaje en rack 1U, 13x puertos Gigabit Ethernet, puerto serie RS232 y fuentes de alimentación redundantes duales (con 48V DC de alimentación de telecomunicaciones y apoyo 802.3at/af). * Esta edición no cuenta con Disco Duro, ni cable SATA
Arquitectura del RouterBOARD: ARM
Nota Importante: Tipo de Arquitectura no Compatible con User Manager. User manager soporte experimental para arquitecturas SMIPS, ARM and MMIPS (RB1100AHx4, RB3011, RB750Gr3 etc.) estara disponible apartir de la versión 6.42rc14
Características principales de RouterOS
Especificaciones Generales
- Codigo de Producto: RB1100Dx4
- Arquitectura: ARM 32bit
- CPU: AL21400-1400-A0-E-1AN-8-C
- Cantidad de Nucleos del CPU: 4
- Frecuencia del CPU: 1.4 GHz
- Dimensiones: 444 x 148 x 47 mm
- Nivel de Licencia: 6
- Sistema Operativo: RouterOS
- Memoria RAM: 1 GB
- Almacenamiento: 128 MB
- Tipo de Almacenamiento: NAND
Alimentación
- Consumo energetico: 25W
- Fuentes de alimentación: 2 (PoE-IN, 2-pin terminal)
- Tipo de Alimentación PoE: 802.3af/at
- Voltaje de alimentación PoE: 20-57 V
- Voltaje de alimentación terminal de bloques: -48, 12-57 V
- Cantidad de entradas AC: 2
- Voltaje de alimentación AC: 100-240 V
Ethernet
- Puertos Ethernet: 13 x 10/100/1000 Mbps
Perifericos
- Almacenamiento extendido: 60GB M.2 SSD (incluido)
- Slots M.2: 2
- Puertos SATA: 2x SATA3
- Puerto Serial (Consola): RS232
Otros
- Monitos actual: Si
- Monitor de temperatura PCB: Si
- Monitor de Voltage: Si
Resultados de pruebas Ethernet
RB1100Dx4 AL21400 1G all port test Modo Configuración 1518 byte 512 byte 64 byte kpps Mbps kpps Mbps kpps Mbps Bridging none (fast path) 606.5 7,365.3 1,736.4 7,112.3 5,509.7 2,821.0 Bridging 25 bridge filter rules 606.5 7,365.3 1,107.8 4,537.5 1,153.2 590.4 Routing none (fast path) 606.5 7,365.3 1,736.4 7,112.3 5092.3 2,607.3 Routing 25 simple queues 606.5 7,365.3 933.6 3,824.0 960.3 491.7 Routing 25 ip filter rules 543.7 6,602.7 561.8 2,301.1 564.6 289.1 Notas:
- All tests are done with Xena Networks specialized test equipment (XenaBay), and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Incluye
- K10 R2 screw kit
- Rack ears
- 2x IEC cords
Garantía










Valoraciones
No hay valoraciones aún.